TMS Compatible Cleaning Blades for Xerox Copiers and Printers: A Full-Range Supplier for Multi-Model Consumable Parts
TMS Compatible Cleaning Blades for Xerox Copiers and Printers: A Full-Range Supplier for Multi-Model Consumable Parts
2026-11-19
97TMS (Teamsung) is a China-based manufacturer of compatible printer and copier consumable parts, operating a 90,000-square-metre production facility in Zhongshan under ISO9001 quality management. Its cleaning blade programme is among the broadest in the aftermarket, covering Xerox DocuCentre, ApeosPort, WorkCentre, DocuPrint, Phaser, Versant and AltaLink platforms — from early C2270-generation machines still in daily service through to current production models.
For distributors and independent service companies, what matters in a blade supplier is not the length of the SKU list. It is whether the working edge holds its angle for a full service cycle, on every batch, without the drum taking damage when it does not.

Why Compatible Blades Instead of OEM Assemblies
On most Xerox copiers, the cleaning blade is sold by the OEM only as part of a larger drum or developer assembly, which turns a routine maintenance item into a four-figure parts bill. A compatible blade bought as a single component restores the same function at a fraction of that cost — provided the edge geometry and polyurethane formulation are right. That proviso is the entire difference between a blade that clears its rated life and one that leaves background fog across every page within a few thousand prints.
TMS Cleaning Blade Range for Xerox Equipment
Five of the most frequently requested drum cleaning blades in the TMS Xerox range:
1. DCC2270 Drum Cleaning Blade — TMS2166G
Reference: OEM 106R01582-Blade. The single most requested Xerox blade in the TMS catalogue, listed for DocuCentre IV/V C2270 through C5570, ApeosPort IV/V equivalents including C6675 and C7775, WorkCentre 7525 to 7970, AltaLink C8030 to C8070 and Phaser 7800. A double-layer version (TMS2166G-TH) is also available for workshops that prefer dual-layer edge construction.

2. WC7425 Drum Cleaning Blade — TMS2090G
Listed for WorkCentre 7425/7428/7435 and ApeosPort-III C2200/C3300. A stable, high-volume workgroup blade where moderate edge pressure is critical to avoiding drum score marks.

3. DP4300 Drum Cleaning Blade — TMS2141G
Covers WorkCentre 7228/7235/7245, DocuCentre 7328 through 7760, DocuCentre C320 to C450, and DocuPrint DP4300/4350/4400/4405 — a single blade that serves both the copier and printer sides of the same platform family.

4. WC 315 Drum Cleaning Blade — TMS2041G
Reference: OEM 059K35480. Fits WC315/320/415/420/518/520 and the WC5016/5020 wide-format units. One of the few blades in this range carrying a published OEM cross-reference

5. V80 Drum Cleaning Blade — TMS2181G
Built for Versant 80 Press and Versant 2100 Press production machines, where blade wear is measured in millions of impressions rather than pages, and edge consistency directly affects colour register.

Four Blade Types Buyers Routinely Confuse
Blade enquiries go wrong most often because four differently-functioning parts share similar names. The drum cleaning blade works against the OPC drum. The transfer belt cleaning blade clears the belt surface. The cleaning blade scraper is a blade-format component used on rollers and internal surfaces. The glass cleaning blade is a fine-precision edge used on platen glass and optical surfaces in the scanner section. Only the first two are imaging blades. A glass cleaning blade has no mechanical relationship to a drum blade, and ordering one in place of the other is a delay with no diagnostic value.
Manufacturing and Quality Control
Every blade in the TMS Xerox range is produced in-house rather than sourced from third-party workshops. Specialised polyurethane is cut to micron-level edge tolerance and bonded to a high-strength carbon steel bracket, with a low-friction surface coating applied to selected high-end models. Working edges are inspected for constant contact pressure and fatigue resistance, and must survive millions of friction cycles without curling or developing defects along the working ridge.
Monthly blade capacity exceeds six million pieces, which is what allows TMS to hold stock across a spread of legacy and current Xerox platforms rather than only the newest machines. Batch traceability runs from the raw polyurethane lot through to the shipping carton, and every production run is validated on matching machines rather than on a test stand alone.
Ordering and Supply Terms
TMS accepts low-MOQ trial orders so distributors can evaluate a blade before committing to volume. Conventional samples dispatch within 2–3 working days, standard bulk orders ship in 3–15 days, and customised products are scheduled separately. Multi-category accessories can be combined into a single shipment for one-stop procurement, and OEM/ODM support covers private-label packaging, custom outer cartons and documentation. Sea and air freight routes reach more than 120 countries and regions.
If you maintain Xerox copiers or supply the parts aftermarket, the practical test for any blade supplier is simple: can they tell you the OEM reference, the exact model list and how the batch was tested? TMS can — and the five blades above are the ones buyers ask for most.


















