Many administrative operation and maintenance personnel in commercial office scenarios have encountered these recurring frustrating problems: the printed pages always carry penetrating vertical black lines, excess toner overflowing from the waste toner bin leaves the entire interior of the device covered in black stains. Even if you manually wipe the photosensitive drum and clean the blade repeatedly, the fault can only be relieved temporarily, and the problem will reappear after printing only dozens of pages. The root cause of the vast majority of such problems is not the damage to the photosensitive drum hardware, but the wrong selection of the cleaning blade.

Many cheap and inferior generic cleaning blades on the market are made of ordinary recycled polyurethane material, with insufficient edge grinding precision. They will suffer wear and deformation after less than a few thousand printing cycles. Not only can they not completely scrape off the residual waste toner on the surface of the photosensitive drum, but the residual hard impurities will also scratch the surface of the photosensitive drum back and forth along the deformed blade edge, causing irreversible permanent scratches. All subsequent printed pages will always have a black line at a fixed position. In severe cases, a large amount of waste toner will accumulate and overflow, contaminating the circuit components inside the machine, directly causing the digital copier worth tens of thousands of yuan to be scrapped prematurely.

✅ TMS Recommended Top-Selling Compatible Cleaning Blades

1. ‌Exclusive Cleaning Blade for Konica Minolta C224 Series Copiers‌
   Adopts double-layer high wear-resistant PU material, the flatness error of the blade edge is strictly controlled within 0.01mm. It has passed 100,000 consecutive printing cycle tests with zero wear, perfectly fits the surface curvature of the color photosensitive drum of this series of models, scrapes off waste toner without residue, and completely avoids black lines and toner leakage problems from the root.
   👉 Direct to product page: Konica Minolta C224 Cleaning Blade

2. ‌

3. Exclusive Cleaning Blade for Ricoh MP C3003 Series Copiers‌
   Equipped with TMS patented low toner consumption technology, the overall waste toner rate of the device is directly reduced by 18%. It perfectly adapts to the high-speed color printing scenarios of this model. There will be no edge displacement and deformation during long-time continuous operation, which greatly reduces the daily operation and maintenance frequency of the device.
   👉 Direct to product page: Ricoh MP C3003 Cleaning Blade

4. ‌

5. Exclusive Cleaning Blade for Canon C5560 Series Copiers‌
   Adopts an additional reinforced wear-resistant layer design, the overall service life is 40% higher than ordinary products on the market, supports continuous printing of millions of pages without failure, and fully meets the high-frequency usage needs of this series of high-volume commercial models.
   👉 Direct to product page: Canon C5560 Cleaning Blade

6. ‌

7. Exclusive Cleaning Blade for Kyocera ECOSYS P5021 Printer‌
   Custom-developed for the special coating of Kyocera ceramic photosensitive drum, it will not damage the surface layer of the drum during the scraping process. Even when printing on special media such as thin paper and tracing paper, there will be no background ash residue, and the output image will always be clean and clear.
   👉 Direct to product page: Kyocera ECOSYS P5021 Cleaning Blade

TMS Full Series of Cleaning Blades adopt self-developed patented double-layer high wear-resistant polyurethane formula. The blade edge is processed through 3 times of micron-level fine grinding technology, and the edge flatness error is strictly controlled within 0.01mm. It can completely fit the surface of the photosensitive drum and scrape off all residual waste toner at one time, without leaving any residual toner to scratch the drum surface. All products have passed 100,000 consecutive printing cycle tests before launch, the overall service life is more than 40% higher than ordinary generic cleaning blades on the market. They are compatible with all mainstream brands of laser printers and digital copier models on the market, completely eradicating these recurring stubborn printing faults such as black lines and toner leakage from the root.

👉 If your device is troubled by page black lines and frequent toner leakage problems, you can directly visit TMS Exclusive Zone for Cleaning Blades to get one-on-one free model adaptation and selection guidance.