Cleaning roller &CCR is a device used in the cleaning assembly of the copier to clean the charging roller. It can remove impurities and toner attached to the charging roller, keep the charging roller clean, and make the equipment more effective and durable during continuous printing. It is mostly suitable for medium and high-speed printing and copying equipment.

Transport roller &Thansport Roller

Product introduction: It is used in paper feeding mechanisms such as electrostatic copiers, laser printers, plain paper fax machines, or multi-function devices that combine the above equipment. Commonly known as: paper supply roller, conveyor roller, impression roller, paper discharge roller, etc.

Commonly used materials: natural rubber (NR), polyurethane rubber, ethylene-propylene-diene rubber (EPDM), polynorbornene rubber, silicone rubber, chlorinated polyethylene rubber, etc. The product has good wear resistance and strong environmental adaptability, and does not slip or crack.

Pick-up roller &Pick Up Roller

Product introduction: The pick-up roller is a wheel that can rub paper off the paper pile. It is mainly used in office equipment such as printers, copiers, quick-printing machines, digital integrated printing machines, etc. Its working principle is that when the transmission shaft where the pickup wheel is located rotates, the pickup wheel is driven to rotate through the one-way clutch (one-way bearing) brake, which sticks the paper that has been pressed under the pickup wheel and drives it to move forward. At the same time, the friction plate (pickup plate, damping plate, damping wheel) that is tightly attached to the pickup wheel below allows the first sheet of paper to be rubbed in, while blocking the second sheet of paper from moving forward with the first sheet of paper.

Commonly used materials: nitrile rubber (NBR), polyurethane, ethylene-propylene-diene rubber (EPDM), etc. The product has good wear resistance, strong environmental adaptability, no slipping, no cracking, and no abnormal noise.